Stroboscope Engineer
用于测量旋转、振动、振荡或往复运动的频闪仪应用程序
应用信息
Advertisement
应用描述
Android应用分析和审查：Stroboscope Engineer，由GyokovSolutions开发。在工具类别中列出。当前版本为11.6，在 20/09/2025 上更新。根据用户在Google Play上的评论：Stroboscope Engineer。超过43 千的安装。 Stroboscope Engineer目前有121评论，平均评分为3.9星
频闪仪应用程序和光学转速计，用于测量旋转、振动、振荡或往复运动的物体。光学转速计可通过从菜单 - 转速计启动来使用。它最常用于：
- 调节旋转速度 - 例如调节转盘的旋转速度
- 调整振动频率
使用方法：
1. 启动应用程序
2. 使用数字选择器设置频闪灯的频率（以 Hz 为单位）
3. 按ON/OFF按钮启动频闪灯
- 使用按钮 [x2] 将频率加倍
- 使用按钮 [1/2] 将频率减半
- 使用按钮 [50 Hz] 将频率设置为 50 Hz。这是为了调节转盘速度。
- 使用按钮 [60 Hz] 将频率设置为 60 Hz。这也是为了调整转盘。
- 通过选中 [DUTY CYCLE] 复选框激活占空比并以百分比调整占空比。占空比是闪光灯亮起时每个周期的时间百分比。
- 您可以选择通过从菜单 - 校准开始校准来校准应用程序。当频率改变时最好进行校准。您还可以在“设置”中手动设置校正时间。
频闪仪的准确性取决于设备闪光灯的延迟。
光学转速计可通过从菜单 - 转速计启动来使用。
它分析移动物体并确定频率（以 Hz 和 RPM 为单位）。
使用方法：
- 将相机对准物体并按开始
- 保持稳定 5 秒
- 结果以 Hz 和 RPM 显示
您可以通过单击磁盘图标来保存测量过程中捕获的图像。测量结束时，将显示一条消息，其中包含保存了多少图像的信息。图像保存在 Pictures/Strobescope 文件夹中。图像的名称以相对于第一张照片拍摄的毫秒数信息结尾。您可以使用此信息通过计算相似图像之间的时间来确定对象 RPM。
最小和最大频率可以在设置 - 转速计中设置。增加最小频率将减少测量所需的时间。最大频率为 30Hz (1800 RPM)。降低最大频率将缩短测量期间处理所需的时间。
我们目前正在提供11.6版本。这是我们最新，最优化的版本。它适用于许多不同的设备。从Google Play商店或我们托管的其他版本中免费下载Apk。此外，您可以在不注册的情况下下载且无需登录。
我们拥有超过2000+的Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ...设备，并提供了许多选项，您可以轻松选择适合您设备的游戏或软件。
如果在Google App Store上有任何国家限制或设备侧面的任何限制，它可能会派上用场。
什么是新的
Stroboscope app
v11.6
- Android 15 ready
v11.5
- Added optical tachometer. Use it from MENU - TACHOMETER. The app analyzes moving object and determines frequency in Hz and RPM.
How to use:
- point the camera to the object and press START
- hold steady for 5 seconds
- result is shown in Hz and RPM
v10.8
- add up to 5 buttons for fast setting of favorite frequencies or RPM
- alternative strobe method in Settings - Use alternative strobe method
v11.6
- Android 15 ready
v11.5
- Added optical tachometer. Use it from MENU - TACHOMETER. The app analyzes moving object and determines frequency in Hz and RPM.
How to use:
- point the camera to the object and press START
- hold steady for 5 seconds
- result is shown in Hz and RPM
v10.8
- add up to 5 buttons for fast setting of favorite frequencies or RPM
- alternative strobe method in Settings - Use alternative strobe method
最近的评论
Paul Durr
Likely I just did not know how to use it correctly. I got a spinning toy (similar to a top) and I wanted to know how fast I could spin it. I affixed a piece of reflective tape on it, got it spinning, and pointed the tachometer to it. Got approximately same result no matter how fast I spun it. Probably used incorrect settings or something.
John Price
Great simple app that gets the job done (but not in sunlight). I used it to check the idle speed on my outboard. A bit of white duct tape on the flywheel and in twilight it worked well. Phone LED's are not bright enough to use in sunlight, and they aren't brief enough flashes to give a true photo grade strobe effect, but it got the job done. Ads are not obtrusive. An improvement would be a bigger frequency slider. It's hard to get the right spot when you are looking at the strobe device.
Dave Eckblad
This isn't very accurate on my Pixel 8 pro. Different hardware may work better. I was able to determine the tenths BPM doesn't increment smoothly. It jumps every ~0.6 BPM or so. 60hz requested is not 60hz output. There's also a noticeable buffer/lag every half a second. Definitely compare this against a known source to see if it works properly for you.
Zachary Varnum
Great little app! The strobe light on my turntable burned out and all of the lights in my house are LED. I was able to use this app to adjust the speed.
IG G
Nice idea and UI, but I doubt accuracy a lot. It flashed 42 times in a minute, when I set it to 1Hz
Zipra
Impressively accurate strobe light compared to other apps. Perfect to measure electric motor rpm. The only app I've found that can actually measure rpm.
Aaqil Khan
Tried it on motor and didn't give accurate speed measurements. I had to borrow an actual stroboscope to do the job.
little Jim
Newest version locks up my phone. Complete reboot required. I hate not being able to revert to previous version of an app! Moto play 2024 w/Android 13