QuickBend: Conduit Bending

最快，最准确的导管弯曲计算器应用程序。

应用信息

版本 :

5.1.1

类别 :

效率

更新 :

November 11, 2025

安装 :

72,444

开发人员 :

Bret H. Hardman

价格 :

$6.99

需要Android :

Android 6.0+

内容等级 :

Everyone

应用描述

Android应用分析和审查：QuickBend: Conduit Bending，由Bret H. Hardman开发。在效率类别中列出。当前版本为5.1.1，在 11/11/2025 上更新。根据用户在Google Play上的评论：QuickBend: Conduit Bending。超过72 千的安装。 QuickBend: Conduit Bending目前有363评论，平均评分为4.4星

QuickBend是最快，最准确的导管弯曲计算器应用程序。

QuickBend是一种先进的导管弯曲计算器，其创建速度快，准确，同时具有视觉吸引力，创新性和直观性。使用基于您正在使用的弯曲机的中心线半径算法为您提供最准确的测量。

轻松选择不同类型的弯曲机，并选择您正在使用的鞋的尺寸和导管类型。您选择的最后一个弯曲器将是再次打开应用程序时出现的弯曲器。在“弯曲规格”部分中查看和编辑弯曲机的信息（中心线半径，减去，增益，后退，行程和半径调整）。

弯曲还包括数据管理，它将保存您输入应用程序的最后一个值。

QuickBend支持以下弯曲。

•抵消
•滚动偏移
•匹配弯曲偏移
•匹配中心抵消
•平行偏移
•三点式马鞍
•四点鞍座
•90
•QuickKick
•踢90
•匹配弯曲踢
•匹配中心踢
•平行踢
•平行踢向前
•化合物90 - 圆形障碍物
•化合物90 - 矩形障碍物
•化合物90 - 方形障碍物
•分段90

QuickBend Benders

•Cosecant（好吧。但是，它不是弯曲机;如果您更喜欢没有半径的标准乘数方法。它是可用的。）
•当前工具：750/751
•当前工具：77
•当前工具：747
•Gardner Bender：大本钟
•Gardner Bender：响尾蛇
•Gardner Bender：电动绕线机
•Gardner Bender：B2000 Cyclone
•Gardner Bender：Ultra Eegor
•Gardner Bender：B300系列
•Greenlee：Hand Benders
•格林利：1800/1801
•格林利：1818年
•格林利：555
•Greenlee：854DX
•Greenlee：855GX
•格林利：881
•格林利：882
•格林利：884/885
•理想：手动弯曲机
•Klein：Hand Benders
•密尔沃基：手动弯管机

QuickBend多个弯曲

•在单根导管上布置多个弯曲。
•抵消障碍
•抵抗障碍
•匹配抵消障碍
•匹配障碍物抵消
•三点鞍座
•四点鞍座
•90˚弯曲，踢
•踢90
•在弯曲之前为需要切割和挤压导管的罕见场合放置切口标记。
•翻转弯曲。
•图形表示弯曲/切割将在导管杆上布置的位置。
•弯曲布局基于弯曲机中心线半径，扣除和增益。
•在具有多种导管尺寸的滚道上工作时，将“测量到中心”切换为帮助排列导管。

QuickBend还包括一个易于访问的量角器级别，可以通过简单的点击进行归零。

QuickBend允许您在任何形式的测量，英制（英制）或公制（cm）之间进行选择。

QuickBend的QuickCheck指示通过将测量值和文本变为红色的微妙变化，是否无法进行弯曲。

当弯曲大于1英寸的管道并弯曲超过30度时，QuickBend的中心线半径算法特别有用。

什么是新的

• Several bug fixes
• New option to change the language within the `More Menu`
• New welcome screen. Give you the ability to change the app settings before using.
• UI improvements
• New bender: B2 Rapid Fire

在Google Play商店进行评分和审查

4.4

363 全部的

5 69.6

4 14.0

3 6.7

2 3.9

1 5.9

安装总数（*估计）

估计Google Play上安装总数, 近似于评级数和在Google Play上达到的安装界限.

最近的评论

Tru Bell

I would give 5 stars if that stupid slider BS wasn't a thing. I can't find out how to disable it and just switch to a normal numpad input. I dont wanna fiddle around with plus or minus whatever or sliding my finger around. I wanna type the dang number and be done. Otherwise, it is near perfect for 1" and 3/4. Haven't tried bigger sizes yet but it's a calculator, so I'm sure they'll be correct.

K A

Plenty of information. Very thorough. That problem is the very 1st measurement I used off this app according to its bend marks on a simple 1 1/2" offset on 854 smart bender were off. Ugly pipe bend. Had to do way too much work on top of the bend to make it work. This leads me to believe that most minimum distances between bends on benders have not been field tested. This was supposed to save me time, but now I'm back to my manual methods.

Leon Samoht

I've only ever paid for two apps. This is one of them. 100% worth it. Many people compliment my conduit work, and I always tell them about this app! It saved me countless of hours and dollars of material. I only use multiple bends feature and it works perfectly! The only thing I'd recommend for a change is the digital level should have a small defined button to actually reset it. I continuously reset the level when handling the phone.

Anthony Walker

This is a fantastic app. Years ago I made a chart for all the benders I've used on the job which included info about the start of bend, the centerline radius, the deductions and the minimum distance from the end of conduit to the shoe. It also had the formula for the developed length of a bend. I don't have to use that chart anymore. This app does it for me.

Blake Tamblyn

Great app. One thing they could add is concentric bends. If that was added it would literally have every possible option for bending with any type of bender. Other than that, it has made years of pipe bending so much easier. I recommend it to everyone. Thanks for such a great app. Well worth the price -IBEW Local 73 member

Skoodoop Milo

I hate that I can't change the "between bends" and "first bend" on the comp 90 bends. That would have been so useful. I love the protractor, although I wish It would be able to zero out itself at true 0⁰ instead of me having to do it manually with a level. I'm still learning, how to bend and how to use the app. The main thing is being able to change more aspects of the bends like I had mentioned in the first paragraph, but this app is pretty good.

Alex Feist

This is by far the best app I have ever used for bending pipe. Super helpful when needing multiple bends with a cut/thread mark for rigid. The fact that it is fractionally accurate is incredible. BEST APP PURCHASE EVER!

Jacob Kral

Really cool, but should add some kind of slide, double tap, hold, etc lock feature to the protractor. I think it'd be way too easy to accidentally reset the zero when trying to use it.