Danfoss Ally™
丹佛斯Ally™為您提供完善的智能加熱系統的所有優勢
應用信息
Advertisement
應用描述
Android應用分析和審查：Danfoss Ally™，由Danfoss A/S開發。在工具類別中列出。當前版本為1.4.1，在 17/09/2025 上更新。根據用戶在Google Play上的評論：Danfoss Ally™。超過43 千的安裝。 Danfoss Ally™目前有68評論，平均評分為3.0星
丹佛斯Ally™-聯網家庭供暖的新領跑者現在該對適合您口袋的智能供暖系統打招呼了。
丹佛斯Ally™通過簡單易用的應用程序為您提供功能完善的智能供暖系統的所有優勢。
使用Danfoss Ally™，您可以完全控制散熱器和地板采暖以及暖氣費用。
無論您是在家中還是在旅途中，都幾乎可以在任何地方，任何時間。
當Danfoss Ally™與您所有其他IoT朋友交談時，您甚至可以用聲音控制加熱系統。
直觀的應用程序用戶界面旨在使您的日常生活盡可能簡單和舒適。該應用程序將指導您完成快速設置。使您的家用暖氣適合您的日常工作。並隨時為您提供完整的概述和控制。
Danfoss Ally™已通過Zigbee 3.0認證。這意味著它與全球其他眾多智能家居設備使用相同的無線語言。允許您將Danfoss Ally™連接到現有的智能家居設置。並使您的智能家居更加智能。
生活是如此復雜。無需智能加熱。
主要特點：
•通過智能手機上的應用程序完全控制散熱器和地板采暖
•通過每天調整室溫來提高舒適度和能源效率
•通過直觀的應用程序控件易於使用和安裝
•旨在橋接形式和功能
•無處不在的遠程控制
•節能高達30％
•適合所有閥門
•免維護恆溫器–電池可持續使用兩年
•與Amazon Alexa和Google Assistant配合使用
•出色的溫度控制
•符合EPBD
•開放式API
•Zigbee 3.0認證
我們目前正在提供1.4.1版本。這是我們最新，最優化的版本。它適用於許多不同的設備。從Google Play商店或我們託管的其他版本中免費下載Apk。此外，您可以在不註冊的情況下下載且無需登錄。
我們擁有超過2000+的Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ...設備，並提供了許多選項，您可以輕鬆選擇適合您設備的遊戲或軟件。
如果在Google App Store上有任何國家限製或設備側面的任何限制，它可能會派上用場。
什麼是新的
- Added option to configure Data Integrations from the Home Management
最近的評論
Emil Kirk
Really poor experience with the app as most of the other reviewers are also mentioning. The hardware itself is perfect, but for some reason there seem to be no interest in getting the app on pair with their competitors like e.g. tado, which will probably make me switch for an easier control. Right now, I for example can't locate the pause button on half of my devices, and haven't been able to for a few months - major bug in my opinion. Only option I have is to manually decrease the heat.
Jens Steen Krogh
Installed and configured thermostats. It can be done even better. Improvements: 1) Target Temperature setting, show range on circle for single touch setting. (current design is not good) 2) Show target temperature on overview 3) Find good representations of valve 0-100% (maybe 5 levels) and show in app and on thermostat itself. 4) Next version. Fix thermostat design so you can measure temperature of valve for return valve control loop optimization. Inflow, external sensor option.
Thomas Gillibrand Madsen
I think there should be a way to change the default behaviour when an thermostat is running out of battery. Now it will open fully to avoid frost damages, but in a case with a house with 8 thermostats it will more likely result in an excessive heating bill and it makes me anxious every time I get a notification about low battery.
Jakob Kjærsgaard
Can't press the ellipsis to add rooms. Some of the Ally thermostats goes into "M" mode by themselves where they then start going extremely hot. For the price of the system it's not a good value, and the app is not impressive either.
Johannes Hansen
Pretty good app but could use some ux improvements. Personally I miss a button on the front page allowing me to turn all "scheduled" thermostats to "away" or "at home" mode at once.
Jesper H
To be honest. The hardware it self is beyond pair, but the app is really unpolished and feels unfinished. Here is some (can only write 500 characters): It is not possible to schedule temperature for the entire house or room at once, you have to set the individual thermostat. The graph for temperature or humidity can only show one day at a time instead of a selected period. Spelling mistake in the ally room sensor (some words capital letters and some camelcase) Ect....
Jesper Nygaard
Looks great, but there is a bug in the home integration. If temp is set to pause, Google homekit think the temp is set to day temp. Also, plenty of room for more features. Like showing how much each thermostat is open. And showing if window open is detected. And getting notifications for certain rooms, like the kids room. Would also be nice to get notifications if the kid turn the temp up. And all of this should be available in graph form!
Christian Vogel
App was responsive with just one thermostat. Getting really sluggish now with five thermostats (switching views takes seconds). I'm worried how sluggish it will be with all twelve thermostats installed soon... Usability: 1) Cannot copy settings to other room. 2) Too little information visible in settings view (separate views for just checking set and min/max temps). 3) Object details (renaming, offline warning) are one tap away, more important settings (temps, schedule) require two taps.